Thread Force Calculator

Thread Force Formula:

\[ F = \frac{2 \times \pi \times eff \times T}{pitch} \]

Force (F):

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is the Thread Force Formula?

The Thread Force Formula calculates the linear force generated from rotational torque in threaded systems. It's essential for mechanical engineering applications involving screws, bolts, and other threaded components.

2. How Does the Calculator Work?

The calculator uses the Thread Force Formula:

\[ F = \frac{2 \times \pi \times eff \times T}{pitch} \]

Where:

\( F \) — Force (N)
\( eff \) — Efficiency (dimensionless)
\( T \) — Torque (Nm)
\( pitch \) — Pitch (m)

Explanation: The formula converts rotational torque into linear force, accounting for the mechanical efficiency and thread pitch of the system.

3. Importance of Thread Force Calculation

Details: Accurate thread force calculation is crucial for designing mechanical systems, ensuring proper fastening, preventing thread stripping, and optimizing mechanical advantage in threaded assemblies.

4. Using the Calculator

Tips: Enter efficiency (0-1), torque in Nm, and pitch in meters. All values must be positive numbers with efficiency typically ranging from 0.3 to 0.9 for most threaded systems.

5. Frequently Asked Questions (FAQ)

Q1: What is thread efficiency?
A: Thread efficiency represents the mechanical efficiency of the thread system, accounting for friction losses. It typically ranges from 0.3 to 0.9 depending on thread type and lubrication.

Q2: How does pitch affect the force?
A: Smaller pitch values result in higher force output for the same torque input, providing greater mechanical advantage but requiring more rotations for the same linear travel.

Q3: What are typical pitch values?
A: Pitch values vary by thread standard. Metric threads might have pitches from 0.25mm to 6mm, while imperial threads range from 4 to 40 threads per inch.

Q4: When is this calculation most important?
A: This calculation is critical in applications requiring precise force control such as clamping systems, linear actuators, jacks, and precision positioning systems.

Q5: How accurate is this calculation?
A: The calculation provides theoretical values. Actual force may vary due to friction variations, wear, manufacturing tolerances, and environmental factors.