Torque To Axial Force Calculator

Torque to Axial Force Formula:

\[ Axial\_force = \frac{T}{K \times D} \]

Axial Force:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is Torque to Axial Force Conversion?

The torque to axial force conversion calculates the linear force generated from rotational torque applied through a mechanical system. This is particularly important in bolt tensioning, fastener applications, and mechanical engineering design.

2. How Does the Calculator Work?

The calculator uses the torque to axial force formula:

\[ Axial\_force = \frac{T}{K \times D} \]

Where:

\( Axial\_force \) — Resulting axial force (N)
\( T \) — Applied torque (N·m)
\( K \) — Torque coefficient (dimensionless)
\( D \) — Diameter (m)

Explanation: The equation converts rotational torque to linear force using the diameter and a torque coefficient that accounts for friction and other mechanical factors.

3. Importance of Torque to Axial Force Calculation

Details: Accurate conversion from torque to axial force is crucial for proper bolt tensioning, preventing joint failure, ensuring structural integrity, and optimizing mechanical designs.

4. Using the Calculator

Tips: Enter torque in N·m, torque coefficient (typically between 0.1-0.3 for standard bolts), and diameter in meters. All values must be positive numbers.

5. Frequently Asked Questions (FAQ)

Q1: What is a typical torque coefficient value?
A: For standard bolts, K typically ranges from 0.15 to 0.25, but varies based on lubrication, thread condition, and material.

Q2: Why is diameter important in this calculation?
A: Diameter directly affects the lever arm and mechanical advantage, significantly impacting the force generated from a given torque.

Q3: Can this formula be used for all fastener types?
A: While the basic principle applies, specific fastener types may require adjusted coefficients or different formulas for precise calculations.

Q4: How accurate is this calculation in real-world applications?
A: The calculation provides a theoretical value. Actual results may vary due to friction, surface conditions, and manufacturing tolerances.

Q5: What units should I use for this calculation?
A: Consistent SI units are recommended: torque in N·m, diameter in meters, resulting in force in Newtons (N).