Torque Wrench Conversion Calculator

Torque Wrench Conversion Formula:

\[ T_{actual} = T_{display} \times \left( \frac{L}{L + e} \right) \]

Actual Torque (T_actual):

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is Torque Wrench Conversion?

Torque wrench conversion calculates the actual torque applied when using an extension on a torque wrench. The extension changes the effective length of the wrench, affecting the actual torque delivered to the fastener.

2. How Does the Calculator Work?

The calculator uses the torque conversion formula:

\[ T_{actual} = T_{display} \times \left( \frac{L}{L + e} \right) \]

Where:

\( T_{actual} \) — Actual torque applied (N·m)
\( T_{display} \) — Torque displayed/set on the wrench (N·m)
\( L \) — Length of the torque wrench (m)
\( e \) — Length of the extension (m)

Explanation: The formula accounts for the increased leverage when using an extension, which reduces the actual torque applied to the fastener compared to the torque setting on the wrench.

3. Importance of Torque Conversion

Details: Accurate torque application is crucial for proper fastener tension, joint integrity, and safety. Using extensions without proper conversion can lead to under-torquing or over-torquing, potentially causing equipment failure or safety hazards.

4. Using the Calculator

Tips: Enter the torque value displayed on your wrench (N·m), the length of your torque wrench (m), and the length of any extension used (m). All values must be positive numbers.

5. Frequently Asked Questions (FAQ)

Q1: Why does torque change with extensions?
A: Extensions increase the effective lever arm length, changing the mechanical advantage and reducing the actual torque applied to the fastener.

Q2: What units should I use for measurements?
A: Use consistent units (meters for length, Newton-meters for torque) for accurate calculations.

Q3: Can I use this calculator for different torque units?
A: The formula works with any consistent units, but the calculator is set up for N·m. Convert other units to N·m first if needed.

Q4: What if I'm using multiple extensions?
A: Use the total combined length of all extensions as the extension value (e).

Q5: Does this work for all types of torque wrenches?
A: This conversion applies to click-type, beam-type, and digital torque wrenches when using extensions.